Soy Wax Candle Making Instruction

If you've never made candles before, soy candle tins are a good place to begin. They're easy to make and can be personalized for any special occasion. Our simple and easy-to-follow instructions will make two 8 oz. candles with your choice of fragrance.

With Mitra Candle Shop's DIY Scented Soy wax Candle Kit, we have everything you need to make two 7 oz. candles of your own! This kit is perfect if you're looking to try something new and not spend a lot of money on materials, because it includes all things necessary from soy wax flakes and wicks down to fragrance oil scents. 

Our Candle Kits are sustainably packaged and handmade in our Toronto, Ontario studio.

 

Candle Making Instruction

 EN

  • Heat one bottle of wax to 185° F for two candles or a half bottle of wax for one candle. Do NOT exceed 200° F as this may burn your wax. You can use microwave, double boiler method, old crock pot, or Presto kettle.
  • While wax is melting, add wicks to jars. Stick wick sticker to bottom of wick and then press into bottom center of container. You can use the tube of an ink pen as a guide for your wick.
  • Let wax cool to 165° - 175° F and then add ½ oz. of fragrance oil per candle. If you make two candles at once, add the entire bottle of fragrance.
  • Stir gently for 2 minutes.
  • Allow wax to cool down to 135° - 145° F. The wax may be slushy in appearance, but this pouring temp will allow your candles to have a smoother surface.
  • Stir again & pour into Mitra’s reusable & FDA approved candle jars.
  • Allow to solidify at room temp.
  • When wax begins to cool and harden, you will need to pull the wick to straighten it. This will help candle to burn even.
  • When candle has completely hardened, trim wick to ¼”.
  • Soy wax creates a natural frosted look. To reduce this, apply heat to top of finished candles with a hair dryer.
  • Let candle cure for at least 24 - 48 hours before burning.

 

Enjoy your candles!

 

FR

  • Chauffez une bouteille de cire à 185°F pour deux bougies ou une demi-bouteille de cire pour une bougie. Ne dépassez pas 200°F car cela pourrait brûler votre cire. Vous pouvez utiliser un micro-ondes, un bain-marie, une vieille mijoteuse ou une bouilloire Presto.
  • Pendant que la cire fond, ajoutez des mèches aux bocaux . Collez l'autocollant de mèche au bas de la mèche, puis appuyez au centre du fond du bocal. Vous pouvez utiliser le tube d'un stylo à encre comme guide pour votre mèche.
  • Laisser refroidir la cire à 165°F - 175°F, puis ajouter ½ oz. d'huile parfumée par bougie. Si vous fabriquez deux bougies à la fois, ajoutez toute la bouteille d'huile parfumée.
  • Remuez doucement pendant 2 minutes.
  • Laisser la cire refroidir à 135°F - 145°F. La cire peut avoir un aspect détrempé, mais cette température de coulée permettra à vos bougies d'avoir une surface plus lisse.
  • Remuez à nouveau et versez dans les bocaux réutilisables et approuvés par la FDA de Mitra.
  • Laisser la cire se solidifier à température ambiante.
  • Lorsque la cire commence à refroidir et à durcir, tirer la mèche pour la redresser. Cela aidera la bougie à brûler uniformément.
  • Lorsque la bougie a complètement durci, coupez la mèche à ¼ de pouce.
  • La cire de soja crée un aspect givré naturel. Pour réduire cela, appliquez de la chaleur sur le dessus des bougies finies avec un sèche-cheveux.
  • Laissez la bougie sécher pendant au moins 24 - 48 heures avant de la brûler.

 

Profitez de vos bougies!